Page 113 - ProStar Product Guide

™
ProStar 70S-6 MIG Wire

Wire Dia Package Part No.
0.023" 2 lb (0.9 kg) spool PRSS6RN06B001
0.023" 12 lb (5.4 kg) spool PRSS6RN06P006
0.023" 33 lb (15 kg) spool PRSS6RN06P015
0.030" 2 lb (0.9 kg) spool PRSS6RN08B001
0.030" 12 lb (5.4 kg) spool PRSS6RN08P006
0.030" 33 lb (15 kg) spool PRSS6RN08P015
0.030" 44 lb (20 kg) spool PRSS6RN08P020
0.030" 330 lb (150 kg) PAC PRSS6RW08Q150
0.030" 660 lb (299 kg) PAC PRSS6RW08Q300
0.030" 1200 lb (544 kg) PAC PRSS6RW08Q550
0.035" 2 lb (0.9 kg) spool PRSS6RN09B001
0.035" 12 lb (5.4 kg) spool PRSS6RN09P006
0.035" 33 lb (15 kg) spool PRSS6RN09P015
0.035" 44 lb (20 kg) spool PRSS6RN09P020
0.035" 60 lb (27 kg) spool PRSS6RN09P027 ProStar ER70S-6 wire is a mild steel welding
0.035" 330 lb (150 kg) PAC PRSS6RW09Q150 wire with higher levels of deoxidizers (Mn and
Si) compared to other mild steel welding wires.
0.035" 660 lb (299 kg) PAC PRSS6RW09Q300
This wire is suitable for welding on mild steels
0.035" 990 lb (449 kg) PAC PRSS6RW09Q450
with moderate amounts of scale or rust.
0.035" 1200 lb (544 kg) PAC PRSS6RW09Q550
0.040" 44 lb (20 kg) spool PRSS6RN10P020 FILLER METALS
0.040" 330 lb (150 kg) PAC PRSS6RW10Q150 SPECIFICATION
0.040" 660 lb (299 kg) PAC PRSS6RW10Q300
AWS 5.18-93
0.040" 990 lb (449 kg) PAC PRSS6RW10Q450
Class ER70S-6
0.040" 1200 lb (544 kg) PAC PRSS6RW10Q550
ASME SFA-5.18
0.045" 2 lb (0.9 kg) spool PRSS6RN11B001
0.045" 12 lb (5.4 kg) spool PRSS6RN11P006
Minimum Mechanical Properties with CO2*
0.045" 33 lb (15 kg) spool PRSS6RN11P015
Tensile Strength 85,000 psi (590 MPa)
0.045" 44 lb (20 kg) spool PRSS6RN11P020
Yield Strength 68,000 psi (470 MPa)
0.045" 60 lb (27 kg) spool PRSS6RN11P027
Elongation in 2" 29%
0.045" 330 lb (150 kg) PAC PRSS6RW11Q150 Charpy V-Notch 60 ft/lb at -20 °F
0.045" 660 lb (299 kg) PAC PRSS6RW11Q300 (81 Joules at -29 °C )
0.045" 990 lb (449 kg) PAC PRSS6RW11Q450
Typical Wire Chemistry (%)
0.045" 1200 lb (544 kg) PAC PRSS6RW11Q550
C 0.06 – 0.12 Mo* 0.15 max
0.052" 44 lb (20 kg) spool PRSS6RN13P020
Mn 1.45 – 1.65 Ni* 0.15 max
0.052" 60 lb (27 kg) spool PRSS6RN13P027
Si 0.80 – 1.00 Ti+Zr* 0.15 max
0.052" 330 lb (150 kg) PAC PRSS6RW13Q150
P 0.025 max Al* 0.020 max
0.052" 660 lb (299 kg) PAC PRSS6RW13Q300
S 0.025 max Fe Bal
0.052" 990 lb (449 kg) PAC PRSS6RW13Q450
Cu 0.30 max
0.052" 1200 lb (544 kg) PAC PRSS6RW13Q550
*Total of Cr + Ni + Mo + V shall not exceed 0.50%.
0.062" 44 lb (20 kg) spool PRSS6RN16P020
0.062" 990 lb (449 kg) PAC PRSS6RW16Q450 * The data contained herein is based on testing performed under standard
laboratory conditions. In normal practice, the results obtained may vary depending
0.062" 1200 lb (544 kg) PAC PRSS6RW16Q550
upon welding parameters, weld metal cooling rate, and the base plate being
joined. The user should always test the electrode prior to its application.
1-800 225 8247 www.praxairwelding.com C13