Page 40 - ProStar Product Guide

ARC ACCESSORIES

™
Centerfire Parts Conversion Guide

Nozzle/ Gas
Simplify your parts Gun Mfr Gun Model Gas Diffuser Adapter Insulator Diffuser
management and ALPHA 2, 3, or 4, Small Not required PRS4323R-2 BERDS-1B3
Binzel ®
improve performance ALPHA 2, 3, or 4 automatic Large Not required PRS10012-2 BERD-1B
by converting all of your Small BER1380005 PRS4323R-2 PRSDS-1-1
Magnum 250
MIG guns to Centerfire Large BER1380005 PRS10012-2 PRSD-1-1
Lincoln ®
nozzles, contact tips, Small Not required PRS4323R-2 BERDS-1T
Magnum 300, Magnum 400
and gas diffusers. Find Large Not required PRS4423R-2 BERD-1T
your gun’s make and Small BER1380018 PRS4323R-2 PRSDS-1-1
XR Edge
model, then refer to Large BER1380018 PRS10012-2 PRSD-1-1
Miller ®
the right for the part XR30A, XR-W, M-25, Roughneck, Python Small Not required PRS4323R-2 PRSDS-1-1
numbers to upgrade. Large Not required PRS10012-2 PRSD-1-1
Small Not required PRS4323R-2 PRSDS-1-1
OXO ® APX
Large Not required PRS10012-2 PRSD-1-1
Small Not required PRS4323R-2 BERDS-1T
Tregaskiss ® Toughgun
Large Not required PRS4423R-2 BERD-1T
Small BER1380019 PRS4323R-2 PRSDS-1-1
No. 1
Large BER1380019 PRS10012-2 PRSD-1-1
Small BER1380005 PRS4323R-2 PRSDS-1-1
No. 2
Large BER1380005 PRS10012-2 PRSD-1-1
No. 3, No. 4, Tuff-n-Lite, Supra XT Small Not required PRS4323R-2 BERDS-1T
(HD Consumables), Spraymaster 450 Large Not required PRS4423R-2 BERD-1T
Tweco ®
Small n/a n/a n/a
No. 5
Large Not required PRS4423R-2 BERD-1T-5
ELC 250, ELC 350, Spraymaster 250, Small BER1380012 PRS4323R-2 PRSDS-1-1
Spraymaster 350 Large BER1380012 PRS10012-2 PRSD-1-1
ELC 450, EL 450, EL 600, Small BER1380017 PRS4323R-2 PRSDS-1-1
Supra XT (EL consumables) Large BER1380017 PRS10012-2 PRSD-1-1

Conversion
Adapter Insulator Cap Gas Diffuser Contact Tip Nozzle
Installation Instructions

STANDARD INSTALLATION INSTALLATION WITH CONVERSION ADAPTER
1) Install insulator cap over neck 1) Install insulator cap over the conversion adapter
2) Trim liner to between 5/8” and 3/4” beyond neck thread 2) Trim liner to between 5/8” and 3/4” beyond adapter thread
3) Torque diffuser onto neck to approx. 12 ft-lbs 3) Torque diffuser onto the adapter to approx 12 ft-lbs
4) Insert tip into the gas diffuser 4) Insert tip into gas diffuser
5) Thread nozzle onto gas diffuser/tip; tighten firmly by hand 5) Thread nozzle onto gas diffuser/tip; tighten firmly by hand

B18 1-877 PRAXAIR www.praxairwelding.com