Page 157 - Praxair Productivity Catalog

Positioners And Turntables

ProStar Specialty Head Stock
™

ProStar specialty head and tail
stock system are designed for LOADS UP TO
maximum productivity and cost- 30 TONS
justifi ed, low cycle rates. A variety
of models are available, including
standard units with power elevation,
pinned elevation, rail-style and rail
car rotators. Head stocks work
well with idler rolls and/or outboard
support stands for rotating and
capturing large, bulky parts.
Chucks included but not shown.

TOTAL WEIGHT ROTATION ROTATION
SPECIFICATIONS OVERHUNG CG TABLE TABLE PILOT HOLE THICKNESS
CAPACITY TORQUE CENTERLINE
PRSHTS60 6,000 lbs. 15,000 in-lbs. 5 in. 3-1/4 in. 30 in. 2-5/16 in. × 3/16 in. 5/8 in.
PRSHTS120 12,000 lbs. 72,000 in-lbs. 12 in. 36 in. 48 in. 3-15/16 in. × 1/4 in. 5/8 in.
PRSHTS200 20,000 lbs. 120,000 in-lbs. 12 in. 36 in. 48 in. 5-1/4 in. × 1/4 in. 5/8 in.
PRSHTS320 32,000 lbs. 192,000 in-lbs. 12 in. 50 in. 59 in. 5-5/8 in. × 1/4 in. 3/4 in.
PRSHTS400 40,000 lbs. 240,000 in-lbs. 12 in. 50 in. 59 in. 5-5/8 in. × 1/4 in. 3/4 in.
PRSHTS500 50,000 lbs. 300,000 in-lbs. 12 in. 58 in. 60 in. 6 in. × 1/4 in. 3/4 in.
PRSHTS600 60,000 lbs. 360,000 in-lbs. 12 in. 63-3/4 in. 59-1/2 in. 6 in. × 1/4 in. 3/4 in.
Specifi cations subject to change without notice. Consult your Praxair representative when ordering.

Available Options
Forward/stop/reverse variable speed STANDARD FEATURES
foot switch
Fast/slow foot switch
Preset digital tachometer  Solid-state controls
Tach feedback  Rigid box section frame
Special voltages  Oversize bearings
Copper welding ground  High-frequency protection
Grippers  Constant or variable-speed drive
Dropcenter to offset eccentric loads

1-800-225-8247 www.praxairusa.com C25